Phase Perfect® Enterprise

Utility quality three-phase power anywhere you need it.

Three-phase power from a single-phase source anywhere you need it. Phase Perfect® Enterprise digital phase converter uses modern solid-state electronics to create utility-quality three-phase power anywhere. Over 20 years of development has resulted in a robust and durable phase converter capable of powering any load, from hard-starting motors to equipment with delicate embedded electronics.

Shop Phase Perfect®

Power Quality

Hard-starting motors demand maximum output along with over-current protection. Delicate embedded electronics, which are getting more common by the day, demand perfectly balanced voltage always, no matter what the demands are on the rest of the system.

No other phase conversion technology can supply the brute force required to start the most demanding loads while protecting everything down to the smallest integrated circuit from damage. The Phase Perfect® uses modern microprocessor-controlled electronics to continuously adapt to changing conditions.

Don't subject your expensive equipment to improper phase timing and voltage imbalance inherent in dated phase conversion technologies. Get utility-quality power with Phase Perfect®.

Maintains phase-to-phase voltage balance within 2%

Electronic power factor correction produces near unity power factor

Sinusoidal input current with very low harmonic content

Output LC filter blocks digital switching-generated noise producing sinusoidal output


Efficiency

An embedded microprocessor constantly ramps up or down based on the needs of the attached equipment. Full power is there when you need it without any wasted energy when you don’t. High efficiency under load and extremely low power utilization when not loaded add up to big cost savings compared to other phase conversion technologies.

The Phase Perfect® will also return power to your single-phase source when any three-phase load is in generating mode. Returning this power and making your utility meter run backwards is a much more efficient solution than wasting any excess power by heating a resistor.

Calculate your savings

Woodworking or Machine Shop Energy Savings: $305.20/year

  Phase Perfect® Rotary Converter
Starting Load Horsepower 20 HP 40 HP
Standby Power Consumption 80W 2260W
Idle Power Cost $11.20 $316.40

Woodworking or Machine Shop: Results are based on 4 hours of idle/non-operating time per day, 5 days per week, 50 weeks per year, at an electric rate of $0.14 per kw/hr.

Elevator Energy Savings: $1,432.82/year

  Phase Perfect® Rotary Converter
Starting Load Horsepower 10 HP 20 HP
Standby Power Consumption 80W 1350W
Idle Power Cost $89.69 $1,513.51

Elevator: Results are based 22 hours idle/non-operating time per day, with the elevator ready for operation 24/7, at an electric rate of $0.14 per kw/hr.


Durability

Phase Perfect®’s have been powering equipment outdoors in the harshest of conditions for over 20 years. The brownouts, outages, and surges in remote areas that see frequent blizzards, lightning storms, and other severe weather has helped our engineers harden the Phase Perfect® into a highly reliable product.

The electronics have been made extremely robust, including the addition of costly film type line filter capacitors and custom inductors. The chassis has a NEMA 3R outdoor rating, so you can mount it anywhere without worry. The onboard software has also been continually upgraded with advanced monitoring and protections to help keep the Phase Perfect® and your expensive equipment safe.


Applications

A huge number of applications and equipment once considered "industrial" require three-phase power. This equipment is increasingly finding use on farms and ranches, in home shops, or other locations where utility-provided 3-phase isn't readily available.

Modern electronic safety features are showing up everywhere, and internet-connected equipment is becoming commonplace. Equipment with embedded electronics is highly sensitive to power quality, and some methods of phase conversion will damage these electronics. A Phase Perfect® will ensure any equipment runs just like it was connected to three-phase from the power company.

Common uses for the Phase Perfect® Enterprise: Elevators, HVAC, Wineries, Irrigation, Woodworking, Machine Shops, CNC Equipment, Polishing & Grinding

Voltage Doubling


The Phase Perfect® Enterprise models on this page are available in a voltage doubling configuration. If your application requires 480V power but you only have a 240V supply, these models will double your supply voltage without requiring a transformer.

Learn about voltage doubling

Convenience

  1. Mount with supplied mounting kit.
  2. Connect two wires in, three wires out.
  3. Ensure the Phase Perfect® Enterprise is well grounded.

Installation of a Phase Perfect® Enterprise is virtually “plug-and-play”. Equipment or a three-phase load center can be connected to the output just like they would be hooked up to utility three-phase.

7.5 Horsepower Phase Perfect input and output power lugs

240V Model Comparison

Model Horsepower Output kVA Max Output Max Input Standby Dimensions Weight Purchase Online
PTE007 7.5HP 10.8kVA 26A 45A 70W 35" x 22" x 8" 60lbs BUY
PTE010 10HP 14.9kVA 36A 62A 74W 35" x 22" x 8" 65lbs BUY
PTE015 15HP 21.6kVA 52A 90A 77W 35" x 22" x 8" 71lbs BUY
PTE020 20HP 26.6kVA 64A 111A 80W 35" x 22" x 8" 72lbs BUY

240V → 480V Voltage Doubling Model Comparison

Model Horsepower Output kVA Max Output Max Input Standby Dimensions Weight Purchase Online
PTE207 7.5HP 10.8kVA 13A 45A 200W 35" x 22" x 8" 65lbs BUY
PTE210 10HP 14.9kVA 18A 62A 320W 35" x 22" x 8" 68lbs BUY
PTE215 15HP 22.4kVA 27A 94A 435W 35" x 22" x 8" 74lbs BUY
PTE220 20HP 26.6kVA 32A 111A 550W 35" x 22" x 8" 80lbs BUY

480V Model Comparison

Model Horsepower Output kVA Max Output Max Input Standby Dimensions Weight Purchase Online
PTE407 7.5HP 10.8kVA 13A 22A 52W 25" x 23" x 8" 56lbs BUY
PTE410 10HP 14.9kVA 18A 32A 68W 25" x 23" x 8" 56lbs BUY
PTE415 15HP 22.4kVA 27A 48A 71W 35" x 22" x 8" 70lbs BUY
PTE420 20HP 26.6kVA 32A 55A 74W 35" x 22" x 8" 72lbs BUY

Phase Perfect® is also available in the highly customizable, original configuration with a larger chassis, higher power ratings, and additional options.


Options

Surge Protection

Available with ProTec, single event MOV type, factory-installed surge protection.

On/Off Switch

The optional on/off switch will completely turn off power to any connected devices, both on the two pass-through legs as well as the generated leg.

Extended Warranty

Although durable and robust in design, a little extra peace of mind never hurts. Phase Technologies is happy to offer an extended warranty for all of those applications that demand a bit extra.


Phase Perfect® Original

Also available in the original, highly customizable, configuration. The original Phase Perfect® set the standard for what was possible with digital phase conversion technology. The available configuration options will ensure the needs of your application can be met with ease.

Read more