About AquaPhase™ Accessories
|
 |
The AquaPhase Keypad
AquaPhase AP Series converters have many
advanced, easy to use features that can operate constant
pressure water systems, protect the motor from damage, monitor
load conditions, log motor run time, troubleshoot the system and
more.
The system is controlled through an
intuitive keypad with backlit LCD screen that displays
32-character text messages.
|
|
Control Features Accessible Through The Keypad
| |
CONSTANT
PRESSURE WATER SYSTEMS
Only AquaPhase offers the choice of a digital or analog constant pressure system.
Both systems provide smooth, steady control of pressure in
response to fluctuating demand for water. Factory default
settings of the constant pressure parameters provide
satisfactory operation in most applications — simply install the
sensors, set the desired pressure and begin pumping. If enhanced
control is required, adjustable parameters allow fine tuning of
the system to meet the user's need.
Digital Constant Pressure System
- Uses affordable digital pressure sensors
- Requires a minimum of parameter adjustment
- Simple to install
Analog Constant Pressure System
- Provides more flexibility in tuning the system
- Extensive menu of adjustable parameters
- Default parameters allow quick setup
PRECHARGE MODE
Fills large plumbing systems at a slower pump speed to prevent
sprinkler head blow-off or burst pipes when the system reaches
the full point. AquaPhase automatically returns to normal
operation when the precharge interval is terminated.
DUPLEX PUMP CONTROL
AquaPhase is equipped with a duplex pump feature that allows for
integrated control of two pumps in the same water system. The
duplex pump feature alternates the pumps on a regular schedule
and can call on the standby pump to maintain pressure in high
flow conditions. No extra equipment is required — simply
configure both units as constant pressure systems and activate
the duplex mode feature. |
|
READ MEASURED VALUES
View a variety of parameters related to the drive and its
load such as voltage, current, output horse power, power factor
of the motor, status of control circuits and more.
CLOCK TIMERS
Records motor run-time and drive on-time in hours. Includes a
resettable timer and a permanent timer for each.
FAULT LOG
Records the number of times each fault has occurred.
ADJUSTABLE PARAMETERS
Select values for a variety of parameters and functions
including:
- Output Voltage
- Automatic restart
- Motor overcurrent
- Restart delay times
- Dry well protection
- Ramp times and profiles
- Current unbalance
- Constant pressure parameters
- Minimum and maximum frequency
- Pre-charge time and parameters
- Vector control parameters
|
|
| |
 |
|
| |
PHASE TECHNOLOGIES WEBSITE
• SITEMAP
Phase Technologies, LLC. • 3620 Homestead St., Rapid City, SD 57703 USA
Phone: (605) 343-7934 • Fax: (605) 343-7943 • Toll Free: (866) 250-7934 •
info@phaseperfect.com
©Copyright. All rights reserved. All italicized text is property of Phase Technologies, LLC.
No portion of this site or its contents may be
duplicated by any means, electronic or otherwise, without the express written consent of Phase Technologies, LLC.
|
|
|
